Understanding Installation Requirements and Environmental Conditions for the YR06235 Electrohydraulic Operating Table
The YR06235 Electrohydraulic Operating Table is a sophisticated piece of medical equipment designed to meet the rigorous demands of general surgical operations. To ensure that this equipment functions optimally, it is vital to consider the specific installation requirements and environmental conditions necessary for its operation.
Overview of the YR06235 Electrohydraulic Operating Table
The YR06235 model is constructed from high-quality stainless steel 304, featuring a radiolucent tabletop suitable for X-ray procedures. The operating table comes equipped with automatic locking functionalities, both in the remote control and for the base, ensuring safety during use. With a sliding capacity of 300-330 mm and the ability to elevate the kidney bridge, the YR06235 is tailored for a variety of surgical applications.
Technical Specifications of the YR06235
| Specification | Details |
|---|---|
| Model | YR06235 |
| Length/Width | 2000mm/500mm |
| Elevation (Up/Down) | 700mm/1150mm |
| Trendelenburg | 25° |
| Reverse Trendelenburg | 35° |
| Lateral Tilt (Left/Right) | 18°/18° |
| Head Rest (Up/Down) | 60°/90° |
| Footplate (Up/Down & Horizontal Positioning) | 10°/90°/90° |
| Back Plate (Up/Down) | 70°/30° |
| Longitudinal Sliding | 300-330mm |
| Kidney Bridge Elevation | 110mm |
| Power | 220v, 50Hz, 1.0kW |
Installation Requirements for the YR06235
When installing the YR06235 Electrohydraulic Operating Table, it is crucial to adhere to specific requirements to ensure safety and functionality:
- Floor Strength: The installation site must support the weight of the operating table and accommodate additional surgical equipment without compromising stability.
- Electrical Supply: Ensure a dedicated power supply of 220v and 50Hz to avoid fluctuations that could affect performance.
- Space Clearance: Maintain adequate clearance around the operating table for easy maneuverability of surgical staff and equipment.
- Anchoring and Leveling: Properly anchor and level the table to prevent movement during procedures.
Environmental Conditions for Optimal Operation
The environmental conditions in which the YR06235 operates can significantly impact its performance. Key considerations include:
- Temperature Range: The operating temperature should ideally be maintained between 20°C to 25°C to ensure optimal functionality.
- Humidity Levels: A relative humidity level of 40-60% is recommended to prevent electronic component damage.
- Vibration and Electromagnetic Interference (EMI): Install the table away from heavy machinery and electronic devices that may cause interference or vibrations.
- Ventilation: Ensure proper ventilation in the operating room to maintain air quality and comfort.
Site Preparation Checklist for the YR06235
| Requirement | Details |
|---|---|
| Floor Strength Assessment | Verify the load-bearing capacity of the floor. |
| Electrical Supply Check | Confirm voltage and frequency specifications. |
| Space Clearance Measurement | Ensure surrounding space is free of obstacles. |
| Anchoring and Leveling | Prepare anchors and leveling tools. |
| Ventilation Inspection | Check existing ventilation systems. |
Frequently Asked Questions
What are the key features of the YR06235 Electrohydraulic Operating Table?
The YR06235 features a stainless steel construction, an X-ray compatible tabletop, automatic locking mechanisms, a significant sliding range, and specialized elevation functions. It is specifically designed for clinical environments requiring precision and reliability.
How do I ensure the YR06235 operates correctly after installation?
To ensure proper operation, conduct a thorough inspection of the electrical connections, confirm the leveling of the table, and perform a test run to verify all functionalities, including elevation and tilting mechanisms.
What should be considered for the electrical setup of the YR06235?
Ensure that the electrical setup complies with the required voltage and frequency specifications (220v, 50Hz). It is advisable to dedicate a circuit to minimize electrical interference and fluctuations during operation.
How important is room temperature and humidity for operating the YR06235?
Maintaining a stable room temperature between 20°C to 25°C and a humidity level of 40-60% is crucial for the longevity and performance of the operating table, helping to prevent damage to electronic components.
Can the YR06235 be used in different surgical settings?
Yes, the YR06235 is designed for versatility and can be adapted for various surgical environments, including general surgery, orthopedic procedures, and emergency operations, making it a valuable asset in any surgical facility.
What maintenance is recommended for the YR06235?
Regular maintenance includes checking the electrical components, ensuring the table is clean and free of contaminants, inspecting the mechanical functions, and conducting periodic professional evaluations to ensure safety and functionality.
If you are looking for a fusion of innovation and quality, you have come to the right place. At Kalstein, we offer you the luxury of exploring our exclusive catalog of laboratory equipment. We manufacture every device to the highest standards of excellence. Our intuitive and seamless online purchasing channels are designed for your convenience, securing the most competitive prices. Hesitate no longer — we bring science to life, it is time to become part of our community.