Bacti-Cinerator Sterilizer YR07073

This model features a large diameter heating head and an adjustable angle: 40° downward from the horizontal position and 15° upward. In addition to loops, needles, standard tweezers, and scissors, it can be used with compatible laboratory items, such as flask mouths, test tubes, and culture plates. Ashes and organic matter remain inside the ceramic ducts, helping to reduce splashes and the risk of cross-contamination.

Its compact size and lightweight make it easy to install on laboratory tables, biosafety cabinets, clean tables, and mobile carts. It can also be used in anaerobic chambers. The indicated environmental range is from −10 °C to 50 °C, with relative humidity of up to 90%; the datasheet states that there is no specified altitude limit.

Market Price

The price of Bacti-Cinerator sterilizers varies depending on the diameter of the chamber, the brand, the electrical configuration, and the supplier. In consulted commercial references, comparable models appear to range approximately between USD 350 and USD 750; some specialized or higher-priced models exceed USD 1,000. These values are indicative and may vary due to taxes, shipping, availability, and accessories.

The current price of the YR07073 should be confirmed through a quote, as it may depend on the destination and purchase conditions. To know the price and associated costs, you can request a quote from the Kalstein team or generate it automatically on the Kalstein Plus platform.

Frequently Asked Questions

How long does it take to sterilize an inoculation loop?
The product datasheet indicates approximately 5 to 7 seconds, once the chamber reaches the working temperature.

Does it need a flame or gas?
No. The device operates with heat and does not use an open flame, making it useful in spaces where the use of alcohol lamps is to be reduced.

What instruments can be introduced?
Inoculation loops and needles, standard tweezers, and scissors are indicated, as well as certain laboratory items. Before introducing an instrument, check that its size and material are compatible with the chamber diameter and exposure to high temperatures.

Can it sterilize all types of laboratory materials?
No. It is designed for instruments and items compatible with its chamber. It should not be assumed to replace an autoclave for sterilizing liquids, large loads, or materials that require a specific validated cycle.

Can it be used in an anaerobic chamber?
Yes. The datasheet indicates that the device can be used in an anaerobic chamber; it is recommended to confirm the electrical and environmental installation conditions before use.

Advantages and Considerations

Among its main advantages are rapid sterilization, operation without an open flame, compact design, and the ability to adjust the head angle. The ceramic duct helps contain ashes and organic matter, and the device can be integrated into different microbiological work areas.

As a consideration, the chamber has a limited capacity due to its diameter, so it is necessary to check the compatibility of each instrument. Additionally, the Bacti-Cinerator does not replace the sterilization methods required for liquids, large volumes, or materials that must be processed in an autoclave. Repeated exposure to high temperatures also requires using instruments suitable for that use and following the manufacturer's instructions.

Product Use in the Field

In a microbiology laboratory, the operator can introduce the end of an inoculation loop or needle into the chamber to sterilize it between sample manipulations. Its operation without an open flame can be convenient in biosafety cabinets, preparation areas, and other spaces where air currents hinder the use of a flame. It can also support work routines in anaerobic chambers, as long as the installation conditions are adequate.

The device is intended for the frequent sterilization of small instruments during daily work. It is not recommended for objects that exceed the opening, that cannot tolerate high temperatures, or whose protocol requires another sterilization method.

Usage and Maintenance Recommendations

Install the sterilizer on a stable and heat-resistant surface, and leave enough space around it for adequate ventilation. Adjust the angle of the head before starting work and follow the manufacturer's instructions regarding exposure time and compatible instruments.

Avoid introducing plastic materials, liquids, or objects that may damage the ceramic element. Keep the device turned off and allow it to cool before cleaning or moving it. Remove residues following the manual and periodically check the condition of the chamber, cable, and electrical connections. For safe installation, also confirm that the voltage and electrical frequency of the device are compatible with those of the place of use.