Heaters are a device commonly used in laboratories to maintain equipment and reagents at controlled temperature. These blankets are composed of electric heaters, resistors, thermometers and temperature controllers. The proper and efficient use of the cloaks can improve the productivity and safety of the laboratories.
Heating blankets offer an effective way to control the temperature of equipment and reagents. This is made possible by the use of electrical resistors that generate heat when coming into contact with a means of energy transmission, usually mineral oil. This heat will allow heating the material to be kept at a controlled temperature, within the specified limits.
How can heating be optimized with the heating cloths in the laboratory?
One of the main challenges when using heating cloths is the proper maintenance of the device. The cloaks must be free of dust and dirt to prevent unnecessary heating problems and the formation of dangerous toxic gases. This can be achieved by exercising careful control over the cleaning regime, periodically performing visual inspections of the cloaks to check their maintenance status. To make this measure more extreme, it is recommended to opt for cloths with materials resistant to corrosion and that do not emit dangerous gases such as carbon monoxide.
Likewise, the efficient use of the mantle also implies periodic calibrations of thermostats and temperature controllers. This will ensure an optimal level of safety, avoiding accidents involving overheating of equipment and reagents. In addition, maintaining an adequate calibration regime will allow to obtain a better energy use of the device, minimizing the electricity consumption and waste production.
What actions should be taken to increase the efficiency of heating coats?
On the other hand, the use of heating cloths in the laboratory will also be increased by implementing some practical changes in the configuration and distribution of the same. The position of the thermostats and temperature controllers must be such that they allow an adequate dispersion of the heat energy for greater efficiency. Therefore, it would be desirable to separate the thermostats and heater controllers, placing them in different positions in relation to equipment and reagents.
A similar change could be applied in the use of thermocouples, taking into consideration that these should be placed at different points on the surface of the mantle for optimal temperature control. This, together with the use of the thermostat and the controller, will ensure a proper temperature distribution for all the elements that will be subjected to the influence of heat.
Another practical tool to maximize the use of heating cloths would be the use of material labeled with temperature control holograms. That is, to place labels with adhesive holograms designed with thermoregulatory properties on the surface of the mantle. This will allow users to assess the temperature of equipment and reagents at any time with precision.
Why is it important to use the heating cloths optimally?
In conclusion, the efficient and safe use of heating cloths in the laboratory will lead to the optimization of energy consumption, avoiding accidents and improving the productivity of the equipment. Proper maintenance, the use of certain safety tools such as temperature control holograms and proper distribution of thermostats and temperature controllers will be the key to achieving proper and safe use of heating cloths within the laboratory.
Finally, using cloaks with safety features such as warning lights or motion detectors will also bring an important level of safety to the process of keeping reagents and equipment at a controlled temperature. These lights shall indicate when the device is operating and shall allow a rapid reaction to any maintenance mishap.
Why choose Kalstein heating blankets?
Kalstein has for sale innovative solutions in heating coats that optimally heat the vessels that are required. These devices are designed for various volumes, with operating temperatures reaching 380 degrees, in compact and lightweight equipment, which can be both analog and digital. On the manufacturer’s website there are several models available for purchase, at really competitive prices. Visit HERE and HERE
